EICASLAB Demo RT-emb: Beagle Bone at work
Demonstration of how to perform ALL control design phases with just ONE suite and ONE project using a Beagle Bone Black board
This Webinar Series shows how to use the Beagle Bone Black version of the EicasLab RT-emb Demo. It includes:
- Overview
- Modelling and Like Real-Time Simulation
- Rapid Control Prototyping On Field
- Slow Motion
- Hardware-in-the-loop
- Final Validation Test
EICASLAB Series: BeagleBone at work! - Webinar n. 1 - Introduction
The webinar gives a short description of all EICASLAB operative modes which manage all control design phases of the Rotating Table control design using a Beagle Bone Black board.
Other documentation on this demo
For more information see the EICASLAB Demo RT-emb page
EICASLAB Series: BeagleBone at work! - Webinar n. 2 - Modelling and Like Real-time simulation
The webinar focuses on the EICASLAB Modelling and Like Real-time operative mode applied to the Rotating Table control design.
Other documentation on this demo
For more information see the EICASLAB Demo RT-emb page
EICASLAB Series: BeagleBone at work! - Webinar n. 3 - Rapid Control Prototyping On Field
The webinar focuses on the EICASLAB Rapid Control Prototyping On Field operative sub-mode applied to the Rotating Table control design.
Other documentation on this demo
For more information see the EICASLAB Demo RT-emb page
EICASLAB Series: BeagleBone at work! - Webinar n. 4 - Slow Motion
The webinar focuses on the EICASLAB Slow Motion operative sub-mode applied to the Rotating Table control design.
Other documentation on this demo
For more information see the EICASLAB Demo RT-emb page
EICASLAB Series: BeagleBone at work! - Webinar n. 5 - Hardware in the loop
The webinar focuses on the EICASLAB Hardware-in-the-loop operative sub-mode applied to the Rotating Table control design.
Other documentation on this demo
For more information see the EICASLAB Demo RT-emb page
EICASLAB Series: BeagleBone at work! - Webinar n. 6 - Final Validation Test
The webinar focuses on the EICASLAB Final Validation Test operative sub-mode applied to the Rotating Table control design.
Other documentation on this demo
For more information see the EICASLAB Demo RT-emb page